RAE Chlorinated Rubber Paint

RAE Chlorinated Rubber - Low VOC - Solvent Based Marking Paints

RAE’s Low VOC Chlorinated Rubber is an oil based alkyd marking paint made with real rubber for better film builds and superior wear resistance. Best for use over concrete or for restriping paint lines. Low VOC for compliance in US States with marking paint regulations for < 100 g/l VOC Formulated for application using Brush, Spray, or Roll. Uses include: painting aisles, cross walks, auxiliary markings of roads, curbs, stop zones, parking lots, storage zones, hospital zones, etc.

Ready to Use - No thinning required. Mix paint thoroughly before using. Do not add gasoline or oil. Clean-up with toluene or acetone. Comply with all Federal, State and Local requirements for disposal of paints and related materials. Dry Time: 10-20 min (walk on), 30-40 min (drive on) - May vary on conditions. Application Temperature: 40° F - 90° F - (substrate temperature) Application: Apply to a wet film thickness of 12 -15 mils Coverage: Approx. 90 ft²/gal. - 20 gal. will stripe a 4¨ line one mile using spray equipment