RAE Alkyd Low VOC Paint

Alkyd – Traffic and Zone Marking Paint - Low VOC Oil Based – Heavy Duty Solvent base - Acetone

RAE’s Low VOC oil based alkyd is a heavy duty marking paint formulated for excellent film build and better resistance to traffic wear and weather. Best for use over concrete or for restriping paint lines. Low VOC for compliance in US States with marking paint regulations for < 100 g/l VOC . Designed for applications using Brush, Spray, or Roll. Uses include: painting aisles, cross walks, auxiliary markings of roads, curbs, stop zones, parking lots, storage zones, hospital zones, etc.

Ready to Use - No thinning required. Do not add gasoline or oil. Mix paint thoroughly before using. Clean-up with toluene or acetone. Comply with all Federal, State and Local requirements for disposal of paints and related materials. Dry Time: 10-20 min (walk on), 30-40 min (drive on) - May vary on conditions. Application Temperature: 40° F - 90° F - (substrate temperature) Application: Apply to a wet film thickness of 12 -15 mils Coverage: Approx. 90 ft²/gal. - 20 gal. will stripe a 4¨ line one mile using spray equipment