RAE Hi-Build Fast Dry Latex Traffic Paint

 -  LOGIN FOR ACCOUNT PRICING  -

RAE Hi-Build Fast Dry Latex Traffic Paint is a high-performance hi-build fast dry latex paint formulated for contractors who demand speed, durability, and excellent coverage. This 100% acrylic latex paint is engineered to deliver thick film builds while maintaining

Hi-Build Fast Dry Latex Traffic Paint is engineered for thick, high-visibility stripes with fast turnaround. Ideal for roads, parking lots, and high-traffic areas, this paint dries quickly, allowing traffic to resume in minimal time. It offers excellent durability and strong adhesion on both asphalt and concrete surfaces.

Formulated for professional use, it meets TT-P-1952F Type III specifications, ensuring compliance with federal performance standards. The high-build formula provides a more pronounced line profile, improving visibility and longevity under heavy wear.

Cleanup is easy with soap and water, making this latex-based paint both user-friendly and environmentally responsible.
Available in a range of standard colors, it's perfect for lane markings, crosswalks, stop bars, and more.

a fast turnaround time and better resistance to wear than standard paints.

It adheres well to concrete, asphalt, or brick. Designed for both indoor and outdoor use, this hi-build fast dry latex paint is ideal for center lines, edge lines, stop bars, crosswalks, runways, highways, parking lots, traffic aisles, and stenciling. It meets TT-P-1952F Type III Federal Specification requirements, making it a reliable choice for municipal and commercial striping. For group orders or questions, contact us at sales@raeproducts.net or 708-396-1984

Product Literature
📊📘 Premium Traffic & Zone Marking Paint Catalogs

Application Instructions:

Surface Prep: The surface must be dry, clean, and free from grease, oil, and loose paint. New concrete should be fully cured. For best adhesion, remove sealers or efflorescence by etching or blasting. Test stripes are recommended for uncured asphalt.

Thinning: Usually not required. If needed, add only a small amount of water. Do not use gasoline, oil, or petroleum-based products.

Application: Stir thoroughly before use. Apply with a marking machine, roller, or brush. Strain when spraying. Apply in dry conditions. Recommended wet film thickness is 25–30 mils, yielding 20–23 mils dry. For cold weather, keep paint warm to ease spraying.

• Application Temperature: 50°F–90°F (min. 5°F above dew point)
• Humidity: Max 85% RH
• Glass Beads: 4–6 lbs per gallon (do not mix into paint directly)

Coverage:

• ~45 ft² per gallon standard
• ~40 gallons = 1 mile of 4" stripe (mechanical)
• ~32 gallons = 1 mile of 4" stripe (truck)

Clean-Up: Use warm water and mild detergent. Remove dried paint with a mild caustic solution.

Spray Equipment: Only use stainless steel equipment. Avoid mild metals due to alkaline sensitivity.

Safety: Avoid skin contact and inhalation. Wear PPE. Store in cool, dry areas and seal tightly after use.