RAE Fast Dry Latex Paint

RAE Fast Dry Latex - Water Based Marking Paint

RAE’s Fast Dry 100% Acrylic Latex Marking Paint is designed for air or airless spraying over new sealcoat and asphalt surfaces. Can also be used over concrete or brick. Indoor & Outdoor uses include: parking lots, edge lines, zone marking, stencil painting, etc.

Ready to Use - No thinning required. Mix paint thoroughly before using. Do not add gasoline or oil. Clean-up with mild soap and water. Filter before Spraying! Comply with all Federal, State and Local requirements for disposal of paints and related materials. Dry Time: 30 min (walk on), allow up to 2-hours before opening up to traffic for maximum drying and minimal dirt retention. Application Temperature: 50° F - 90° F - (substrate temperature) Application: Apply to a wet film thickness of 12 -15 mils Coverage: Approx. 90 ft²/gallon (20 gal. = 1 mile @ 4”)