RAE Acetone Acrylic Traffic Paint

Acetone Acrylic Solvent Based Traffic Marking Paint - Low VOC - under 100 g/l

RAE's Acetone-based Acrylic Marking Paint is an extremely fast curing marking paint with high durability. Unlike other solvent-based paints, acetone acrylic can be used safely over freshly applied sealcoat or asphalt without staining. This paint can be used over concrete, asphalt, or brick. Indoor & Outdoor uses include: painting center lines, edge lines, auxiliary markings of highways, runways, crosswalks, curbs, stop zones, parking lots, storage zones, traffic aisles, etc.

Ready to Use - No thinning required. Mix paint thoroughly before using. Do not add gasoline or oil. Use Acetone or Toluene for cleanup. Comply with all Federal, State and Local requirements for disposal of paints and related materials. Dry Time: 10 min (walk on), 25 min (drive on) - May vary on conditions. Application Temperature: 40° F - 90° F - (best with surface temp. above 50°F) Application: Apply to a wet film thickness of 12 -15 mils Coverage: Approx. 90 ft²/gal. - 20 gal. will stripe a 4¨ line one mile using spray equipment